Temporary Snow Fence
Product Overview
Extruded high-density polyethylene (HDPE) mesh barrier designed for highway winter maintenance, perimeter control on civil construction sites, and open-pit mining safety zones. Engineered using virgin polymer compounded with Hindered Amine Light Stabilizers (HALS), this high-visibility orange barrier withstands sub-zero operating environments and dynamic wind loads without structural embrittlement or ultraviolet (UV) degradation. Supplied in continuous rolls for rapid deployment and retrieval across seasonal infrastructure projects.
Key Features
High-Visibility Chromaticity:
Formulated with heavy-metal-free UV color masterbatch to maintain international safety orange visibility under heavy snowfall and low-ambient-light conditions.
Sub-Zero Elasticity:
Polymer matrix engineered to maintain flexibility down to -40°C, enabling unrolling and mechanical staking in frozen ground without cracking.
Bi-Directional Tensile Strength:
Multi-axis stretching during the extrusion process aligns molecular chains, providing high transverse and longitudinal break resistance against heavy snowdrifts.
Reusability:
100% recyclable virgin polymer construction allows dismantling, rolling, and redeployment across multiple consecutive winter operating seasons.
Technical Specifications
|
Technical Parameter |
Standard Grade (SF-80) |
Commercial Grade (SF-100) |
Heavy-Duty Grade (SF-140) |
|
Polymer Resin |
Virgin HDPE + 2.0% HALS |
Virgin HDPE + 2.0% HALS |
Virgin HDPE + 2.5% HALS |
|
Mass per Unit Area (GSM) |
80 g/m² (± 5%) |
100 g/m² (± 5%) |
140 g/m² (± 5%) |
|
Standard Roll Width |
4 ft (1.22 m) |
4 ft (1.22 m) |
4 ft (1.22 m) |
|
Standard Roll Length |
100 ft (30.5 m) |
100 ft (30.5 m) |
100 ft (30.5 m) |
|
Mesh Aperture Size |
45 mm x 45 mm (Oval) |
45 mm x 40 mm (Oval) |
40 mm x 40 mm (Rectangular) |
|
Tensile Strength (MD) |
>= 2.8 kN/m (ASTM D882) |
>= 3.6 kN/m (ASTM D882) |
>= 5.2 kN/m (ASTM D882) |
|
Tensile Strength (TD) |
>= 1.8 kN/m (ASTM D882) |
>= 2.4 kN/m (ASTM D882) |
>= 3.5 kN/m (ASTM D882) |
|
UV Weathering Resistance |
300 Kilolanglelys (>= 2 yrs outdoor) |
400 Kilolanglelys (>= 3 yrs outdoor) |
500 Kilolanglelys (>= 4 yrs outdoor) |
|
Color Specification |
International Safety Orange |
International Safety Orange |
International Safety Orange |
|
Operating Temperature |
-40°C to +60°C |
-40°C to +60°C |
-40°C to +60°C |

Department of Transportation (DOT) Highways: Deployed along state and federal corridors prone to snow drifts to minimize snowplow operational frequency and prevent whiteout hazards.
Civil Construction Sites: Installed as temporary perimeter boundary fencing around active excavation areas, material staging zones, and restricted access perimeters.
Mining & Aggregate Operations: Utilized for temporary dust/sand control barriers and hazard demarcation in open-pit mining environments.
Winter Recreation Facilities: Boundary control for ski resort parking lots, perimeter boundaries, and avalanche-prone access paths.
Installation & Usage Guidelines
Post Alignment:
Drive steel T-posts or structural stakes into the ground at intervals of 8 ft (2.4 m) to 10 ft (3.0 m) along the surveyed alignment line.
Ground Clearance:
Mount the bottom edge of the fence approximately 6 in (150 mm) above the grade. This prevents initial baseline snow burial and optimizes aerodynamic wind-scour turbulence beneath the mesh.
Fastening Method:
Secure the fence to each support post using UV-stabilized heavy-duty cable ties or galvanized tie wire at a minimum of 4 vertical contact points per post.
Tensioning:
Pull the roll taut between terminal anchor posts prior to final locking to prevent sagging under high-velocity crosswinds.
OEM & Custom Manufacturing Solutions
As an ISO 9001-certified extrusion manufacturer, we provide flexible OEM/ODM capabilities for global distributors, municipal contractors, and safety supply wholesalers:
Custom Mass Range: Extrusion capabilities from 60 GSM to 200 GSM engineered to meet exact tender specifications.
Dimensional Customization: Roll widths available from 3 ft up to 6 ft; custom continuous roll lengths up to 300 ft (100 m).
Color Masterbatch Blending: Custom color matching for safety orange, international yellow, green, or black per project engineering specs.
Private Labeling: Paper core printing, waterproof woven bag outer packaging, and barcode label integration featuring your brand identity.
Raw materials and finished extrusion lots are subjected to strict internal quality control protocols prior to container loading:
Melt Flow Index (MFI) Verification: Conducted on incoming virgin resin batches to ensure uniform polymer melt viscosity.
QUV Accelerated Weathering (ASTM G154): Simulates multi-year solar ultraviolet exposure to verify chromaticity retention and tensile strength degradation limits.
Tensile & Elongation Testing (ASTM D882): Tested on automated dynamometers to verify longitudinal and transverse break loads under controlled tension.
Grammage Control: Periodic gravitational sampling per production shift to guarantee exact compliance with declared GSM metrics.

Frequently Asked Questions

Request a Quote
To receive an immediate commercial quotation including freight estimates to your destination port, please submit your exact project parameters below:
• Required GSM / Weight per Roll:
• Roll Dimensions (Width & Length):
• Quantity (Number of Rolls or 40HQ Containers):
• Destination Port / Postal Code:
• Target Delivery Date:
We are one of the most reliable temporary snow fence manufacturers and suppliers in China, specialized in providing high quality customized products. We warmly welcome you to wholesale discount temporary snow fence for sale here from our factory. Contact us for pricelist and free sample.
48X100 orange snow fence, green temporary snow fence, 4 X 50 Orange Plastic Snow Fence
