Key Features

Continuous Reverse-Twist Weaving:

Eliminates structural deformation under tension; unlike straight-twist alternatives, local wire breakage does not propagate across the mesh panel.

Dual-Layer Corrosion Protection:

Hot-dip galvanized base wire (zinc coating up to 275 g/m2) encased in a tight-bonding, heavy-gauge PVC jacket (0.4 mm to 1.0 mm thickness).

Controlled Aperture Geometry:

Precision die-formed hexagonal openings maintain uniform dimensional stability, critical for automated installation and rigid framing.

High Tensile Core:

Low-carbon steel wire drawn to a tensile strength range of 350-500 MPa, resisting impact from livestock and shifting earth loads.

 

Technical Specifications

 

Parameter

Standard Specification

Heavy-Duty / Custom Specification

Material Core

Low-Carbon Steel Wire (Q195 / SAE 1008)

Stainless Steel (304 / 316) on request

Mesh Aperture (Inch/mm)

1/2 inch (13 mm), 1 inch (25 mm), 2 inch (50 mm)

3/4 inch (19 mm), 1-1/2 inch (38 mm)

Wire Gauge (BWG / mm)

BWG 18 (1.20 mm) to BWG 22 (0.70 mm)

BWG 14 (2.00 mm) to BWG 16 (1.60 mm)

Coating Type

Hot-Dip Galvanized + Extruded PVC

Electro-Galvanized + PVC / Hot-Dip Galvanized only

Zinc Coating Weight

40-60 g/m2 (Commercial Grade)

220-275 g/m2 (Heavy Commercial)

PVC Coating Thickness

0.5 mm nominal (after bonding)

0.4-1.0 mm customizable

Standard Roll Width

0.5 m, 1.0 m, 1.2 m, 1.5 m, 1.8 m, 2.0 m

Up to 4.0 m width available

Standard Roll Length

25 m, 30 m, 50 m

Jumbo rolls up to 100 m for industrial setups

Tensile Strength

380-450 MPa

Up to 520 MPa

 

Green Poultry Netting

 

Applications

Agricultural Enclosures: Construction of poultry coops, rabbit hutches, orchard protection cages, and livestock boundary fencing where animal waste and soil contact accelerate corrosion.


Civil Engineering & Embankments: Rockfall mitigation netting along transport corridors and soil reinforcement for steep slope stabilization.


Gabion Basket Fabrication: Used as primary facing or internal partition mesh for retaining walls and coastal breakwaters.


Building & Construction: Stucco backing mesh and plaster reinforcement in exterior insulation and finish systems (EIFS).


Horticulture: Tree guards, climbing plant support structures, and rodent barrier installations in commercial nurseries.

 

Installation & Usage Guidelines

Tensioning Requirements:

Install using mechanical wire stretchers to maintain proper tension along terminal posts. Recommended post spacing: 2.5 m to 3.0 m for standard agricultural fencing.

Fastening Hardware:

Secure mesh to steel posts using galvanized binding wire (1.6 mm core) or stainless steel C-rings spaced every 300 mm along line posts.

Cutting & Handling:

Use heavy-duty industrial wire cutters. Avoid bending the PVC coating over sharp angles during sub-zero ambient installation (less than 0 degrees Celsius) to prevent jacket micro-cracking.

Ground Burial:

When burying the lower 150-300 mm of mesh to prevent burrowing pests, ensure backfill soil is free of heavy construction debris that could abrasively strip the PVC layer.

 

 
OEM Solutions & Customization
 
01/

Private Label Packaging: Waterproof woven outer wrapping with customer-specified barcode labels, SKU markings, and compliance tags.

02/

Custom Roll Dimensions: Non-standard roll widths (0.3 m to 4.0 m) and exact metric or imperial lengths manufactured to project specifications.

03/

Color Matching: PVC coating available in standard Dark Green (RAL 6005), Charcoal Black (RAL 9005), and custom RAL color codes to match local architectural or environmental regulations.

04/

Tolerance Control: Strict manufacturing tolerances on wire diameter (plus or minus 0.03 mm) and aperture pitch to guarantee interchangeability in automated assembly lines.

 

 

Quality Control & Manufacturing Standards

Raw Material Verification: Incoming low-carbon steel wire rods undergo spectrometer testing for chemical composition (carbon, manganese, sulfur, phosphorus limits) before drawing.


Coating Adhesion Testing: PVC-coated samples undergo mandrel bend tests and boiling water immersion tests to verify zero separation or blistering between the steel core and the polymer sheath.


Galvanizing Compliance: Zinc mass per unit area tested via gravimetric method per ASTM A90 / ISO 1461 standards.


Dimensional Inspection: Automated optical sizing checks verify mesh pitch and diagonal squareness across every production run.


Certifications: Manufacturing facilities operate under ISO 9001 quality management systems. Mill Test Certificates (MTC) supplied with every shipment.

Black Plastic Poultry Net

 

 

Frequently Asked Questions

 

 

Q: How does PVC coating thickness affect the outdoor lifespan of hexagonal mesh?

A: The PVC coating acts as an impermeable barrier against moisture, airborne industrial pollutants, and agricultural acids (such as poultry manure ammonia). A nominal PVC thickness of 0.5 mm over a heavy galvanized core (200 g/m2 zinc) prevents moisture from reaching the base steel, extending the service life to 15 to 20 years in harsh environments, compared to 3 to 5 years for standard electro-galvanized uncoated wire.

Q: What documentation is provided with container shipments for import compliance?

A: Every shipment includes a Commercial Invoice, Packing List, Bill of Lading, Certificate of Origin (Form A, CO, or FTA documentation as required), and Mill Test Certificates (MTC) detailing chemical analysis and tensile test results of the steel batch.

Q: How do you prevent roll damage during ocean freight transit?

A: Rolls are tightly compressed, machine-strapped, and wrapped in heavy-duty moisture-resistant woven plastic film. For containerized FCL shipments, rolls are stacked vertically or horizontally with wood blocking and dunnage bags to eliminate shifting during long-haul maritime transport. Palletized options are available upon request.

Q: What is the standard minimum order quantity (MOQ) for wholesale orders?

A: Standard stock items (Green PVC-coated 1 inch mesh, 1.0 m x 30 m rolls) have an MOQ of one 20-foot container (FCL) to optimize freight costs. Mixed container loads comprising different wire gauges and aperture sizes can be accommodated upon request.

 

modular-1
Request for Quotation

To receive a formal quotation with landed freight estimates, please provide the following parameters:
Aperture Size & Wire Gauge: e.g., 1 inch opening, BWG 20 core
Surface Treatment: Hot-Dip Galvanized + PVC Coated / Galfan / Stainless Steel
Roll Dimensions: Width x Length per roll
Order Volume: Total square meters or number of container loads
Destination Port: CIF / CFR terms

We are one of the most reliable hexagonal mesh manufacturers and suppliers in China, specialized in providing high quality customized products. We warmly welcome you to wholesale discount hexagonal mesh for sale here from our factory. Contact us for pricelist and free sample.